Section 27-652
* § 27-652 Paving. (a) Definitions. For the purposes of this article
the following terms shall have the following definitions:
ASPHALT. A dark brown to black bitumen pitch that melts readily and
which appears in nature in asphalt beds or is produced as a by-product
of the petroleum industry.
ASPHALTIC CONCRETE or ASPHALT PAVING. A mixture of liquid asphalt and
graded aggregate used as a paving material.
I-4 MIX. A type of heavy duty asphaltic concrete mix containing 0.75
inch (19 mm) nominal maximum size aggregate with 25% to 50% of the
aggregate capable of passing through a No. 8 sieve and in which all sand
contained in the mix is crushed.
RECLAIMED ASPHALT PAVEMENT. Asphalt pavement that has been processed
for reuse in asphaltic concrete.
(b) Reclaimed asphalt pavement content in asphaltic concrete.
Asphaltic concrete, other than I-4 mix or other approved heavy duty
asphaltic concrete mix, shall contain not less than thirty percent
reclaimed asphalt pavement, as measured by weight. I-4 mix or other
approved heavy duty asphaltic concrete mix shall contain not less than
ten percent reclaimed asphalt pavement, as measured by weight. Reclaimed
asphalt pavement used in asphaltic concrete shall comply with the
version of ASTM D692 or ASTM D1073 specified in chapter 35 of the New
York city building code or in the rules of the department. This
subdivision shall not apply to asphaltic concrete used in a project
where the content of asphaltic concrete is governed by a federal or
state law, rule, regulation, guideline, or specification that requires a
different composition or to runways, taxiways, or other surfaces
utilized by aircraft. The commissioner may waive compliance with this
subdivision if the commissioner, after consulting with the commissioner
of transportation and the owners or persons in charge of all asphalt
plants located within the city, finds that a sufficient supply of
reclaimed asphalt pavement is not available.
* NB There are 2 § 27-652's
* NB Effective January 1, 2015